Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
C powder and BC pellet regarding the eutectic reaction with stainless steelHong, Z.*; Ahmed, Z.*; Pellegrini, M.*; Yamano, Hidemasa; Erkan, N.*; Sharma, A. K.*; Okamoto, Koji*
Progress in Nuclear Energy, 171, p.105160_1 - 105160_13, 2024/06
In this study, it is found that the eutectic reaction between BC powder and stainless steel (SS) is considerably more rapid than that between the BC pellet and SS. The derived reaction rate constant values for powder and pellet cases are consistently based on the reference values. Also, a composition analysis using SEM/EDS was conducted for the detailed microstructures of the powder and pellet samples. In the powder case, only one thick layer is found as the reaction layer consisting of (Fe, Cr)B precipitate, including BC powder. In the pellet case, two layers are found in the reaction layer.
Namie, Masanari; Saito, Junichi
Computational Materials Science, 239, p.112963_1 - 112963_7, 2024/04
Yamano, Hidemasa; Futagami, Satoshi; Ando, Masanori; Kurisaka, Kenichi
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 11 Pages, 2024/03
In this study, the dynamic structural analysis of the reactor vessel for excessive earthquake using the FINAS/STAR code has shown the elephant foot buckling deformation and calculated the cumulative fatigue failure fraction. Using the calculation results, this paper describes the fragility curve using the safety factor method, indicating the significantly improved curve compared the previous one.
Yoshimura, Kazuo; Doda, Norihiro; Igawa, Kenichi*; Uwaba, Tomoyuki; Tanaka, Masaaki; Nemoto, Toshiyuki*
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 8 Pages, 2024/03
To investigate possibility of the insertion of the reactivity by the deflection of the upper core support plate, structural mechanics analyses of the domain consisting of the fuel assemblies and core support plates and evaluation of the reactivity due to the inclination of the fuel assemblies in EBR-II were carried out. As a result, it was indicated that the upper core support plate deflected downward larger at the low flowrate condition than that at the high flowrate condition and positive reactivity was inserted due to the inclination of the fuel assemblies at the low flowrate condition.
Kasahara, Naoto*; Yamano, Hidemasa; Nakamura, Izumi*; Demachi, Kazuyuki*; Sato, Takuya*; Ichimiya, Masakazu*
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 8 Pages, 2024/03
In this study, we propose failure mitigation methods by application of passive safety structures. The idea of the passive safety structures was applied to next generation fast reactors under high temperature conditions and excessive earthquake conditions.
C in Mod.9Cr-1Mo steel to 1
10
cyclesToyota, Kodai; Imagawa, Yuya; Onizawa, Takashi; Kato, Shoichi; Furuya, Yoshiyuki*
Nihon Kikai Gakkai Rombunshu (Internet), 89(928), p.23-00206_1 - 23-00206_15, 2023/12
In order to design fast reactors, it is necessary to consider high cycle fatigue of structural materials up to 110
cycles; to evaluate high cycle fatigue at 110 cycles, it is necessary to develop a best-fit fatigue curve applicable up to 110 cycles. In this study, high cycle fatigue tests were conducted under strain-controlled conditions and ultrasonic fatigue tests were also conducted to develop a high cycle fatigue evaluation method for Mod.9Cr-1Mo steel, which is a candidate material for fast reactor structural materials. Based on the test results, the best-fit fatigue curves were extended and the applicability of the JSME best-fit fatigue curves up to 110 cycles was verified.
C-SS and its relocation behaviorAhmed, Z.*; Sharma, A. K.*; Pellegrini, M.*; Yamano, Hidemasa; Okamoto, Koji*
Proceedings of Saudi International Conference On Nuclear Power Engineering (SCOPE2023) (Internet), 8 Pages, 2023/11
In this study, the eutectic behavior and subsequent melt structure of boron migration are observed by a quantitative and high-resolution visualization method using radiative heating. Experiments were conducted using B4C pellet and powder within SS tubes, replicating the actual control rod design in the temperature range of 1150C to 1372C to study long-duration melting and relocation behavior. The visualization technique accurately identified the time of eutectic melting onset and the related temperature, pointing out different values for the pellet and the powder cases.
Yokoyama, Keisuke; Uwaba, Tomoyuki
Journal of Nuclear Science and Technology, 60(10), p.1219 - 1227, 2023/10
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)no abstracts in English
Yamano, Hidemasa; Kurisaka, Kenichi; Takano, Kazuya; Kikuchi, Shin; Kondo, Toshiki; Umeda, Ryota; Shirakura, Shota*
Dai-27-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 5 Pages, 2023/09
This project studies investigation on safety design guideline and risk assessment technology for sodium-cooled fast reactor with the molten-salt heat storage system, development of evaluation method for heat transferring performance between sodium and molten-salt and improvement of the performance, and evaluation of chemical reaction characteristic between sodium and molten-salt and improvement of its safety. The project overview is presented in this report.
Tanaka, Masaaki; Uchibori, Akihiro; Okano, Yasushi; Yokoyama, Kenji; Uwaba, Tomoyuki; Enuma, Yasuhiro; Wakai, Takashi; Asayama, Tai
Dai-27-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 5 Pages, 2023/09
The book, JSME Series in Thermal and Nuclear Power Generation Vol.3 Sodium-cooled Fast Reactor, was published as a 30th anniversary memorial project of Power & Energy Systems Division. This paper describes an introduction of the book on a part of key technologies regarding safety assessment, thermal-hydraulics, neutronics, and fuel and material development. This introductory paper also provides an overview of an integrated evaluation system named ARKADIA to offer the best possible solutions for challenges arising during the design process, safety assessment, and operation of a nuclear plant over its life cycle, in active use of the R&D efforts and knowledges on thermal-hydraulics and safety assessment with state-of-the-art numerical analysis technologies.
Yoshimura, Kazuo; Doda, Norihiro; Nakamine, Yoshiaki*; Fujisaki, Tatsuya*; Igawa, Kenichi*; Iida, Masaki*; Tanaka, Masaaki
Dai-27-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 5 Pages, 2023/09
In Japan Atomic Energy Agency, a virtual plant model of the sodium-cooled fast reactor plant composed in a computer is being developed to reduce the development cost, by replacing the experiments to the numerical simulations with coupled analyses of the physical phenomena accounting for the interaction between components under various plant conditions. Through the numerical analysis of the ULOHS test in the U.S. experimental fast reactor named EBR-II, applicability of the virtual plant model was confirmed in comparison with the measured data including the core inlet temperature and the reactor power.
Doda, Norihiro; Igawa, Kenichi*; Iwasaki, Takashi*; Murakami, Satoshi*; Tanaka, Masaaki
Nuclear Engineering and Design, 410, p.112377_1 - 112377_15, 2023/08
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)To enhance the safety of sodium-cooled fast reactors, the decay heat in the core must be removed by natural circulation even if the AC power supply to the forced circulation equipment is lost. Under natural circulation conditions, sodium flow is driven by buoyancy, and flow velocity and temperature distribution influence each other. Thus, it is difficult to evaluate the core hot spot temperature by deterministically considering the uncertainties affecting flow and heat. In this study, a statistical evaluation method is developed for the core hot spot temperature by using Monte Carlo sampling methods. The applicability of the core hotspot evaluation method was confirmed in three representative events during natural circulation decay heat removal operations in loop-type sodium-cooled fast reactors.
Yamano, Hidemasa; Morita, Koji*
Proceedings of 20th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-20) (Internet), p.4295 - 4308, 2023/08
This study applied the SIMMER-IV code with the newly developed model to a preliminary SA analysis of the SFR. The analysis results show that the eutectic reaction is caused by the contact between the liquid SS and the broken BC pellets which are released to the coolant channel after the failure of cladding which is melted by the mixture of liquid SS and fuel particles coming from the neighboring fuel assemblies. The liquid eutectic material formed by the reaction moves from the control assembly to the neighboring fuel assemblies. The lower density of the eutectic melt than molten SS drives the upward motion of the eutectic in the molten core pool. This analysis indicated that the SIMMER-IV code using the eutectic reaction model has successfully simulated the eutectic reaction and the relocation of the eutectic melt as well as the reactivity transient behavior caused by the molten core material relocation.
Ikusawa, Yoshihisa; Nagayama, Masahiro*
JAEA-Data/Code 2023-006, 24 Pages, 2023/07
JAEA-Data-Code-2023-006.pdf:1.42MB
Core fuels with stainless steel cladding and high plutonium content mixed oxide (MOX) fuel in a water-cooled environment, such as supercritical water-cooled reactors (SCWR) and reduced-moderation water reactors (RMWR), have been studied. In order to contribute to the research and development of such a core fuel concept, the fuel performance code "FEMAXI-8" was verified based on the results of post irradiation examinations of MOX fuel irradiated in the experimental fast reactor "JOYO". FEMAXI-8 is the latest version of the behavior analysis code developed by JAEA to analyze the behavior of light water reactor fuels under normal operation and transient conditions. This latest code has been improved and developed to allow the selection of stainless steel cladding property models to analyze improved fuels such as accident tolerant fuels. The purpose of this report is to confirm the prediction accuracy of FEMAXI-8 for the irradiation behavior of the new type of core fuel that is currently being developed. As a result of the verification, it was confirmed that FEMAXI-8 has sufficient analysis accuracy for the irradiation behavior of sodium-cooled fast reactor MOX fuel with stainless steel cladding, which exceeds the plutonium content and irradiation conditions of light water reactors. In the future, the analysis accuracy of FEMAXI-8 could be improved by adopting the O/M ratio dependence of MOX fuel thermal conductivity and the irradiation behavior evaluation model at high temperature.
Doda, Norihiro; Nakamine, Yoshiaki*; Kuwagaki, Kazuki; Hamase, Erina; Kikuchi, Norihiro; Yoshimura, Kazuo; Matsushita, Kentaro; Tanaka, Masaaki
Keisan Kogaku Koenkai Rombunshu (CD-ROM), 28, 5 Pages, 2023/05
As a part of the development of the "Advanced Reactor Knowledge- and AI-aided Design Integration Approach through the whole plant lifecycle (ARKADIA)" to automatically optimize the life cycle of innovative nuclear reactors including fast reactors, ARKADIA-design is being developed to support the optimization of fast reactor in the conceptual design stage. ARKADIA-Design consists of three systems (Virtual plant Life System (VLS), Evaluation assistance and Application System (EAS), and Knowledge Management System (KMS)). A design optimization framework controls the connection between the three systems through the interfaces in each system. This paper reports on the development of an optimization analysis control function that performs design optimization analysis combining plant behavior analysis by VLS and optimization study by EAS.
Yoshikawa, Ryuji; Imai, Yasutomo*; Kikuchi, Norihiro; Tanaka, Masaaki; Gerschenfeld, A.*
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 10 Pages, 2023/05
Removal of core decay heat by utilizing natural circulation is expected as a significant measure to enhance the safety of sodium-cooled fast reactors (SFRs). Accurate evaluation of the temperature distribution in the fuel assembly (FA) at the low Re regime in natural circulation operation is demanded. A detailed thermal-hydraulics analysis code named SPIRAL has been developed to clarify thermal-hydraulic phenomena in the FA at various operation conditions. In this study, SPIRAL with the hybrid turbulence model was applied to analyze a large-scale fuel assembly experiment of a 91-pin bundle for two cases at the mixed and the natural convection conditions respectively in low Re regime with heat transfer from outside of the FA. The applicability of the SPIRAL to the thermal-hydraulics evaluation of FA at mixed and natural convection conditions was confirmed by the comparisons of temperatures predicted by SPIRAL with those measured in the experiment.
Kikuchi, Norihiro; Mori, Takero; Okajima, Satoshi; Tanaka, Masaaki; Miyazaki, Masashi
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 8 Pages, 2023/05
JAEA is developing an evaluation system aided by artificial intelligence (AI) named ARKADIA (Advanced Reactor Knowledge- and AI-aided Design Integration Approach through the whole plant lifecycle). A sub-system of it, named ARKADIA-Design, is being developed to support the design optimization study for an advanced nuclear plant including a sodium-cooled fast reactor (SFR). Authors are developing a design optimization process for the structure of the component in SFR. This paper describes the outline of a design optimization process, the brief introduction of evaluation methods for the process, and the result of the demonstration of the optimization process for a feasibility study. The development is being performed in a representative problem considering the thermal transient and seismic motion as a major issue in SFRs. Through the demonstration, it was confirmed that the optimization process under development may provide an optimal solution to the representative problem.
Yamano, Hidemasa; Chenaud, M.-S.*; Tsige-Tamirat, H.*; Sumner, T.*; Lee, J.*; Liu, S.*; Peregudova, O.*
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05
The Generation IV (GEN-IV) international forum is a framework for international co-operation in research and development for the next generation of nuclear energy systems. Within the GEN-IV sodium-cooled fast reactor (SFR) system arrangement, the SFR Safety and Operation (SO) project addresses the areas of safety technology and reactor operation technology developments. The aims of the SO project include (1) analyses and experiments that support establishment of the safety approaches and validate the performance of specific safety features, (2) development and verification of computational tools and validation of models employed in safety assessment and facility licensing, and (3) acquisition of reactor operation technology, as determined largely from experience and testing in operating SFR plants. The tasks in the SO topics are categorized into the following three work packages (WP): WP-SO-1 "Methods, Models and Codes" is devoted to the development of tools for the evaluation of safety. WP-SO-2 "Experimental Programs and Operational Experience" includes the operation, maintenance and testing experiences in experimental facilities and SFRs, and WP-SO-3 "Studies of Innovative Design and Safety Systems" relates to safety technologies for GEN-IV reactors such as active and passive safety systems and other specific design features. This paper reports recent activities within the SO project.
Yoshimura, Kazuo; Doda, Norihiro; Fujisaki, Tatsuya*; Igawa, Kenichi*; Tanaka, Masaaki; Yamano, Hidemasa
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 10 Pages, 2023/05
The benchmark analyses for the unprotected loss of heat sink (ULOHS) tests in the pool-type experimental SFR in the United States, EBR-II (BOP-301 and BOP-302R) have been conducted in order to validate the evaluation method of the reactivity feedback equipped in the plant dynamics analysis code named Super-COPD. In this study, 1D-CFD coupled analyses adding the core bowing reactivity model were conducted. Through the analysis, the applicability of the modified reactivity model was confirmed for the BOP-301 test. For the BOP-302R test, consideration of the core restraint system in the core and modeling the control rod driveline expansion reactivity was indicated.
Yoshimura, Kazuo; Doda, Norihiro; Igawa, Kenichi*; Tanaka, Masaaki; Yamano, Hidemasa
Journal of Nuclear Engineering and Radiation Science, 9(2), p.021601_1 - 021601_9, 2023/04
Feedback reactivity automatically caused by radial expansion of the core is known as one of the inherent safety features in a sodium-cooled fast reactor (SFR). In order to validate the evaluation models of the reactivity feedback equipped in the in-house plant dynamics analysis code named Super-COPD, the benchmark analyses for the unprotected loss of heat sink (ULOHS) tests of BOP-302R and BOP-301 in an experimental SFR, EBR-II were conducted and the applicability of the evaluation method for the reactivity feedback was indicated during the ULOHS even, by comparing the numerical results and the experimental data.
